Sublimation Printer

Home>>Sublimation Printer

Epson SureColor F6200, F7200, F9200 Printer Maintenance Solutions and Common Faults Solutions

Suit for Epson Surecolor printer.

F6200, F6280

F7200, F7280

F9200, F9280, F9380

Key words: Epson Surecolor F6200, F7200, F9200 printer maintaince.

surecolor-f6200-ink-bay-001.jpg

1. After the ink cartridge is printed, it will not print?

1). Bubbles in the cartridge: Clean the print head using the printer's automatic cleaning procedure. If multiple cleanings still cannot be improved, do not remove the ink cartridges. After several hours of waiting, retesting may be possible.

2). Did not tear off the label: Remove the label completely! (The print quality cannot be guaranteed if the tear-off label is removed after the ink cartridge is installed)

3). The print head is clogged or burned: Clean the print head and replace the print head that has reached the end of its useful life.

4). The control circuit is bad: Replace the print head or main board and recommend to the professional maintenance department.


2.  After the new ink cartridge is set up, it shows "Ink Out":

1). The ink cartridge is not installed, or the power is too large during installation: Reload the ink cartridge and pay attention not to increase the power.

2). The ink cartridge is not installed correctly. After the printer is forcibly powered off, install the ink cartridge. Follow the correct procedure to re-operate the power supply, but only need to open the cover and then close, and then clean the print head.

3). The reeds in the print head are out of action: Replace or repair.


3. The horizontal stripes, white stripes or graphic elements appear shallow on the printed image, and are blurred:

1). The media setting does not match the type actually used: Modify the media type in the driver to match the actual media.

2). The media is facing down: Place the print media correctly with the print side facing up.

3). The nozzle has dirt: Clean the nozzle.

4). The ink cartridge is nearly empty. The ink level is low. Check the ink lamp on the printer control panel. Prepare to replace the ink cartridge.

5). Continuous printing time is too long: Pause printing, turn off the power, wait 10-20 minutes.

6). There is an air bubble in the cartridge: Clean the nozzle.


4. Vertical lines are misplaced or vertical lines appear:

1). The print head is dirty The individual nozzles are not ink: Clean the print head

2). High-speed print mode in the printer driver is on: Turn off this mode.

3). Print head misalignment: Run the print head alignment procedure in the driver.

4). Continuous printing time is too long: pause printing, turn off the power, wait 10-20 minutes.


5. Vertical lines are misplaced or vertical stripes appear:

1). The print head is dirty The individual nozzles do not emit ink: Clean the print head.

2). High-speed print mode in the printer driver is on: Turn off this mode.

3). Print head misalignment: Run the print head alignment procedure in the driver.

4). Continuous printing time is too long: pause printing, turn off the power, wait 10-20 minutes.


6. The image is incorrect or lack of color:

1). Ink is set to "Black" in the printer driver: Modify the settings, set to "Color".

2). The media setting does not match the print media actually used: Modify the print media settings in the driver, or replace the matching print media.

3). The media is facing down: Place the print media correctly, taking care that the print side is facing up.

4). The midtones and mode selection does not match the file type: The mode setting does affect many other settings in the driver; the midtone setting determines how the printer ejects ink droplets onto the print media; if set incorrectly, color deviation will result. .

5). The print head is dirty, and the individual nozzles are not ink: Clean the print head.

6). The cartridge is low on ink and one or more colors of ink are empty: Check the cartridge to see if you need to replace the cartridge.


Hanrun Paper is a professional sublimation printing and sublimation transfer solution supplier.

Sublimation Paper manufacturer since 2009, we are top factory in China.

Sublimation Paper | Epson sublimation paper | EVO sublimation paper

Sublimation Ink | KIIAN | J next | Epson | Mimaki | Inktec | Kisco Papijet

Sublimation Printer | Epson sublimation printer | Roland sublimation printer | Mimaki sublimation printer | 1.8m three 5113 | 1.8m four 5113 | 1.8m two DX5 | 3.2m three 5113

Spare Parts

Calender heat press machine | Lanyard heat press machine | Calender heat transfer machine | Pneumatic heat press machine | Hydraulic heat press machine

Sublimation protection tissue paper

Sublimation laser cutting machine | Double head laser cutting machine

www.hanrunpaper.com

info@hanrunpaper.com

WhatsApp: 0086 18936865061