/
/
Be careful when using a print head for Epson I3200-A1
All categories

Be careful when using a print head for Epson I3200-A1

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2021-03-09 17:28

(Summary description)Hanrun sublimation printers have always been "high quality" in the choice of complements as a famous high quality printer. In-depth cooperation was achieved in 2012 between Hanrun Sublimation Printer Factory and Epson. Epson printheads, including I3200-A1, have been fitted to every equipment.

Be careful when using a print head for Epson I3200-A1

(Summary description)Hanrun sublimation printers have always been "high quality" in the choice of complements as a famous high quality printer. In-depth cooperation was achieved in 2012 between Hanrun Sublimation Printer Factory and Epson. Epson printheads, including I3200-A1, have been fitted to every equipment.

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2021-03-09 17:28
  • Views:
Information

 

Hanrun sublimation printers have always been "high quality" in the choice of complements as a famous high quality printer. In-depth cooperation was achieved in 2012 between Hanrun Sublimation Printer Factory and Epson. Epson printheads, including I3200-A1, have been fitted to every equipment.

 

Epson I3200-A1 is a relatively sensitive piece of printed head, you have to be very careful when using them, let's look into care!


1. Shut down, as prescribed: turn off control software first, and then turn off the Fedar sublimation print main power switch to ensure that carriage is returned to normal position so it is fully closed to prevent blocking nozzle heads and capping station.


2. It is recommended to use the original cap when replacing cap of Fedar sublimation printer, otherwise the cap could deform and cause nozzle locks, nozzles, and poor tin removal. Please clean cap and waste ink tube with cleaning fluid to avoid dryness and obstruction if the Fedar subimation impressor is unused for more than three days.

 

3. It is recommended to use the original ink, and to prevent a chemical reaction, to blocks the printed head and to affect photo quality, it is strictly forbidden to mix two different brands.

 

4. Do not plug or unplug a Fedar sublimation printer's motherboard when the power is on to avoid damage.

 

5. As a precision printing device is a Fedar sublimation printer, branded voltage stabilizer is recommended for approximately 2000W power supply.

 

6. Maintaining temperature at around 15°C-30°C, and 35%-65% moisture. Maintain a clean work environment and avoid dust.

 

7. Scraper: Clean Fedar sublimation printer capping station wiper regularly to protect the print head against tin solidification.

8. Platform for working: keep the table without dust, ink and debris to avoid scratching of the printed head.

 

9. Cartridge: close the lid after the ink is filled to avoid the entering of dust.

 

Using the Epson I3200-A1 print head, the items above should be specially considered. Be careful to use and maintain the Fedar Sublimation Printer printer's print head, so that the print head can last longer.

 


Contact us:

Email: info@hanrunpaper.com
Whatsapp: 0086 189 9402 7160
Address: No.10 building, Baijiahui Innovation Community, 699-18 Xuanwu Avenue, Nanjing, China

Keyword:

Scan the QR code to read on your phone

Address :403, No.10 building, Baijiahui Innovation Community, 699-18 Xuanwu Avenue, Nanjing, China
Telephone Number :008602583377515
Mobile Phone :008617714537154
Email :info@hanrunpaper.com

Hanrunpaper certification

Copyright:Hanrunpaper.Com   苏ICP备19025883号-1   Privacy policy