/
/
What you need for using DTF film on wood products
All categories

What you need for using DTF film on wood products

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2021-05-20 16:11

(Summary description)In last post, we have talked about what DTF can do on wood materials, so in this post Hanrun paper will tell you what you need to start these business.

What you need for using DTF film on wood products

(Summary description)In last post, we have talked about what DTF can do on wood materials, so in this post Hanrun paper will tell you what you need to start these business.

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2021-05-20 16:11
  • Views:
Information

In last post, we have talked about what DTF can do on wood materials, so in this post Hanrun paper will tell you what you need to start these business.

 

To be able to make customizations on wood using the DTF technique, you will have to have the following:

     DTF film: DTF film is a new technology which is much more easier to use than T-shirt transfer paper and much more environmental friendly than Eco-solvent printable vinyl.

     DTF printer: To be able to print the design that we want to stamp on the wood, a duly modified inkjet printer is needed for the DTF

     DTF adhesive powder : To make the design adhere to the surface, it is necessary to use DTF adhesive powder. This creates a sticky layer on top of the wet ink.

     Heat press machine : A Heat press machine is an essential machine for heat transfer and It's much more efficient than an iron.

 

How to customize wood with DTF

Now, if we already have everything we need to be able to customize the wooden product we want, we will have to follow the following steps:

1.    Print the design on the film with the DTF printer. Be careful because the inks are wet! In addition, you will have to print with a white base pattern or that the colors you are going to print are darker than wood.

2.    Spread the DTF powders over the printed design making sure you go through the entire design.

3.    Bake the powder and patterns together to make the powder melt on the design.

4.    Heat press on the wood: Once the previous steps have been carried out, we will have to carry out our heat press machine at a temperature of 160º for 15 seconds with a medium-high pressure.

5.    Let cool and peel or discard the film. Always slowly and carefully!

 

But this is not all. We give you a trick to make your personalization look much better. And, to avoid having to square the design perfectly, we recommend that you print with dimensions larger than wood . Later you would have to cut the excess using a utility knife.

These parameters and this trick that we discuss work with any wooden product, be it a keychain, a panel, a notebook or a box. So… give it a try!


Contact Us

Global sales e-mail: info@hanrunpaper.com

Global sales WhatsApp: 0086 177 1453 7154

Address: No.10 building, Baijiahui Innovation Community, 699-18 Xuanwu Avenue, Nanjing, China

Keyword:

Scan the QR code to read on your phone

Address :403, No.10 building, Baijiahui Innovation Community, 699-18 Xuanwu Avenue, Nanjing, China
Telephone Number :008602583377515
Mobile Phone :008617714537154
Email :info@hanrunpaper.com

Hanrunpaper certification

Copyright:Hanrunpaper.Com   苏ICP备19025883号-1   Privacy policy